TE12L6651
STAINLESS STEEL
TE12L6651B
PAINTED BLACK STEEL
-
Available in Stainless Steel grade 316, bright polished or mild steel with a black painted finish.
-
Includes removable interior knob.
-
Locking type, keyed alike.
-
Supplied with gasket.
Search
You are here:
Lock & Handles
RECESSED FLUSH LOCK
“DROP-T” FLUSH LOCK
TE12L6661
-
The dish is Stainless Steel grade 316, bright polished.
-
T-Handle is die cast and chrome plated.
-
The Drop-T provides a very rugged, fully flush fitting lock system.
-
Locking type. keyed alike.
-
Incorporates rod lock mechanism. (Use rod and guide Part No. TE12L785. Sold separately - see rod lock assemblies)
RECESSED HANDLES
TE12L6611
-
Locking type.
-
Black polyester coated dish with chrome plated handle.
-
Universal dish for left or right handed fitment.
-
Suitable for compartment doors carrying light loads only.
TRAILER TRAVEL LATCH
TE12L60250
-
CHROME PLATED FINISH
-
STYLISH COMPACT DOOR LOCKING ASSEMBLY
-
INTERIOR SNIB-LOCK
-
IDEAL FOR USE ON MOBILE HOMES, HORSE FLOATS, GROOMING/LIVING ACCOMMODATION AND RECESS DOORS.
CHROME HANDLE
TE12L1302
Polish chrome finish
Also available keyed alike.
CHROME T HANDLE
TE12L4400
FRONT FIXING
TE12L4403
REAR FIXING
-
Polished chrome finish.
-
Available as through-front fixing or concealed rear fixing.
BLACK T HANDLE
TE12L4400B
FRONT FIXING
-
Matt black finish
-
Keyed alike
PLANT ON SLAM LOCK
TE12L8911
(pictured) Left Hand
TE12L8912
(pictured) Right Hand
TE12L8924
Universal 2-way action, locking
-
Pressed steel case and handle (TE12L8911 and TE12L8912 have plastic coated handles).
-
Malleable iron tongue.
DOOR COMPRESSION FLUSH LOCK
-
Locking type
-
Keyed alike
-
Dust seal
-
Adjustable screw
-
Available in Black or Chrome Plated
-
2 Sizes available
| PART NO | A | B | FINISH |
| TE12L2400B | 35mm | 80mm | Black - Satin |
| TE12L2400C | 35mm | 80mm | Chrome Plated |
| TE12L2420B | 50mm | 104mm | Black - Satin |
| TE12L2420C | 50mm | 104mm | Chrome Plated |
MINI DOOR LOCK SET
TE12LB600
-
Ideal for smaller container doors.
-
Uses 22mm dia. pipe (not included).
-
Finished in electro zinc plating.
ROD LOCK ASSEMBLIES
TE12L785
-
Rods are 10mm x 1145mm long: centre of pivot to end.
-
To suit TE12L6661"Drop T” Flush Lock.
-
2 rods, 2 guides and 2 bolts and nuts.
ROD LOCK ASSEMBLIES
TE12L770-2
2 Way
TE12L770-3
3 Way
Operated by a T Key or suitable outside handle with an 8mm square spindle. Zinc plated mild steel. Rods are 10mm x 1145mm long: centre of pivot to end. Throw of rods = 35mm.
BONNET STAY
TE12M10
A simple and extremely popular design with 'draw' of approximately 216mm with mounting brackets which can swivel freely. It locks in the extended position and a further slight extension then frees the mechanism , allowing it to be closed.
Length between fixing centres is 2696mm (closed) and 485mm (open) - not inlcuding bracket.
COMPARTMENT LOCK
TE12L44019
Complete with pronged washer and fixing nut.
PLASTIC MOULDED HANDLE
TE12M60
A clever design, moulded in black polypropylene with integral snap-shut sections to conceal fixing holes.
Under proof test conditions these handles withstood loads of over 250kg before serious deformation.
Under proof test conditions these handles withstood loads of over 250kg before serious deformation.
